HLP500MB, Advanced Digital Motor Load Monitor + Modbus Comms 

Code: HLP500MB
£475.61 exc. VAT £570.73 inc. VAT
Quantity discounts:
2+ £428.06 exc. VAT £513.67 inc. VAT
5+ £416.16 exc. VAT £499.39 inc. VAT
10+ £404.27 exc. VAT £485.12 inc. VAT
HPL500MB Digital Load Monitor with Modbus, 3x380Vac, 3x400Vac, 3x415Vac, 3x440Vac, 110Vac, 230Vac Supply, From Unipower
Quantity:
Unipower HPL500-MB is equipped with a specially developed power supply for use from 100V - 575V - both single phased and three phased. Mains voltages in the whole world is hereby covered with one unit. HPL500-MB also measures currents up to 40A without the use of an external current converter.
As all Unipower HPL-modules the HPL500-MB integrates the functions necessary to establish an efficient and compact supervision or control; Start ti- mer, reaction timer, setpoints etc.
For setup simplicity the HPL500 includes peak detectors on the power measure- ment.
This MB-version is an RTU-slave on a MODbus network.
 
Technical Specifications
Mechanical spec.
Housing
Makrolon 8020 (30% GV), UL94V-1
(house).
Makrolon 2800, UL94V-2 (connector + front).
 
Mounting
Snap-on construction for 35mm DIN-rail or wall mounting.
 
Protection class
IP40 (house).
IP20 (connector).
 
Operating Temperature range:
-15 - +50 °C surrounding air.
 
Weight: Approx. 250g.
 
Dimensions: D 110 x W 56 x H 75 mm.
 
Terminal tight. torque: 7lbs/in, 0.79Nm Use 60/75 copper (CU) wire only
 
Electrical spec.
Supply / measuring voltage
1x100 - 1x400Vac ±10%.
3x100 - 3x575Vac ±10%
 
Current range
Internal: 0.5, 1, 2.5, 5, 10, 20, 30 & 40A
External: With N/5A converter (50-600A) Accuracy: Class 2.
 
Consumption: 2 VA
 
Frequency range 45 - 65 Hz
 
Relay spec. 250 VAC/5 Amp.
 
MODbus
RTU-slave
 
CE-mark to:
EN61326-1, EN61010-1
 
UL certified:
UL508, File E194022
 
GOST-R certified.
Our site uses cookies. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings